Free Update to QuickPHOTO Industrial 2.3 build 873-VII

This installer will update your QuickPHOTO Industrial 2.0, 2.1, 2.2, 2.3 to the latest available version.

Installation procedure:

1. Click on the Download update link and save the file to the disk.
2. Logon to the operating system as an administrator.
3. Make sure the QuickPHOTO program is installed on your computer and it is not running.
4. Run the downloaded update file and follow the on-screen instructions.
5. During the installation of the program an installer of new dongle device driver will appear. The installation of a new dongle device driver is neccessary for correct work of the program. Install the dongle device driver as follows. Select a language and press the OK button. Then press the Next button. Check the I accept the license agreement option and press the Install button to continue. Complete the dongle driver installation by pressing the Finish button.
6. Complete the program installation according to the on-screen instructions.

What is new ?

• Support of Lumenera® INFINITY digital cameras added
  • Supported models: Lumenera® INFINITY 1-2C, 1-3C, 1-5C, 2-1C/M, 2-2C/M, 2-3C, 3-1C/M, 4-11C/M, X-32C
  • Support of Microsoft® Windows® 7 (32bit, 64bit)/Vista/XP operating system
• New interface for TWAIN devices
  • Improved compatibility with imaging devices
• New control panel of OLYMPUS® SLR cameras:
  • Support of OLYMPUS® E-3, E-30, E-620, E-600, E-520, E-510, E-450, E-420, E-410 cameras
  • Support of Microsoft® Windows® 7 (32bit, 64bit)/Vista operating system
  • The SLR cameras can be now controlled from Windows® accounts with limited privileges (Microsoft® Windows® 7 (32bit, 64bit)/Vista/XP/2000)
  • Shading correction function added
  • Timestamp function (insertion of date and time of capture into images) added
  • Function for crop borders from live image added
  • RECORD IT module (real time video recording) support added
• New control panel of IDS uEye® cameras:
  • Support of new IDS uEye® models added: (UI-1545LE-C -1.3 Mega pixel CMOS, UI-1465LE-C - 3 Mega pixels CMOS, UI-1485LE-C - 5 Mega pixels CMOS, UI-2240-C - 1.3 Mega pixel CCD)
  • Support of Microsoft® Windows® 7 (32bit, 64bit) operating system
  • Timestamp function (insertion of date and time of capture into images) added
  • Speed adjustment function (for adjustment of camera performance) improved
  • The display of actual framerate added
  • Quality of video recorded by RECORD IT module improved
• New control panel of OLYMPUS® DP72 camera:
  • Support of Microsoft® Windows® 7 (32bit, 64bit)/Vista operating system
  • Shading correction function supported
  • Timestamp function (insertion of date and time of capture into images) supported
  • Saving of settings to Profiles supported
  • RECORD IT module (real time video recording) supported
• New control panel for analog video signal sources:
  • Timestamp function (insertion of date and time of capture into images) added
  • Function for crop borders from live image added
• New version of built-in module for creation of video files from time-lapse captured images:
  • Creation of HD video files with resolution up to 1600x1200 pixels
  • Timestamp function added (insertion of date and time of image capture into video file)
• New version of Timer module with better timing accuracy
• The constrain proportions function for Crop and Select area tools
• Ukrainian language version
• Measurements:
  • Possibility to measure and calibrate the software more precisely. The measurements can be performed in a zoomed image. The measuring objects can be dragged beyond the edge of the visible area of the image. The image will scroll automatically.
  • New measuring cursor for better measuring accuracy
  • Possibility to move the rectangular grid

OLYMPUS® is a registered trademark of OLYMPUS Corp.
Microsoft®, Windows® are registered trademarks of Microsoft Corp.
uEye® is a registered trademark of IDS Imaging Development Systems Inc.
Lumenera® is a registered trademark of Lumenera Corp.